Why does my router keep disconnecting from the internet?

Intermittent router disconnections have several common causes: ISP line instability (call your ISP if drops happen at consistent times of day), router overheating (check that the vents are unobstructed and the router is not in an enclosed space), or router firmware issues (update to the latest firmware). If the router is more than 3-4 years old and drops are increasing, hardware degradation is a possible cause.

My router connects but shows 'No Internet' — what does that mean?

Connected to router but no internet means the router is not getting a valid WAN IP address from the ISP, or the DNS servers are not responding. Check: 1) all cables are seated firmly (WAN port to modem, modem power); 2) try rebooting the modem separately from the router; 3) if the modem shows online but the router does not get a WAN IP, the issue may be MAC address binding at the ISP — clone your router's MAC address to match the previous device.

How do I reset a router to factory settings?

Most routers have a physical reset button (usually in a small hole on the back) that resets to factory settings when held for 10-15 seconds with a paperclip or pin. A factory reset clears all custom settings: WiFi names, passwords, port forwarding rules, and QoS settings. You will need to reconfigure the router from scratch after a factory reset.

Router Not Connecting to Internet: How to Fix Common WiFi Problems

Fix a router that won't connect to the internet, drops connections, or shows limited connectivity. Covers WAN connection issues, DNS problems, IP address conflicts, and firmware resets.

The WiFi icon shows full bars. Nothing loads anyway.

That disconnect, connected but useless, is one of the most common router complaints, and it's almost never a mystery once you check the right things in order.

Router internet problems fall into a handful of categories: a stale connection that just needs a reboot, a bad cable, a WAN configuration issue, or DNS.

Work through the checks below in order, most people find the fix in the first two.

Check 1: Reboot the Modem and Router (Separately)

Turn off the router. Turn off the modem. Wait 30 seconds. Turn the modem on first and wait 60 seconds for it to establish the ISP connection. Then turn the router on.

This resolves a majority of temporary connection issues — the router receives a fresh DHCP lease from the ISP and re-establishes the WAN connection.

Check 2: Check the WAN Cable

The Ethernet cable between the modem and the router's WAN port is a common failure point. Swap it with a different cable if you have one. Also confirm the cable is in the WAN port, not a LAN port — they look identical and are an easy mistake.

Check 3: Check the Router's Admin Panel for WAN Status

Access the router admin panel (typically at 192.168.1.1 or 192.168.0.1) and check the WAN or Internet status page. If it shows "No IP" or "Disconnected":

PPPoE connection: verify the PPPoE username and password are entered correctly in the router's WAN settings
Dynamic IP: the ISP has not assigned an IP — this is usually a modem or ISP issue, not a router issue

Check 4: DNS Issues

If the WAN IP is assigned but browsing is broken:

Try visiting a site by IP address directly (e.g., 1.1.1.1 for Cloudflare's test page)
If that works, the issue is DNS — change the DNS servers in the router admin panel to 1.1.1.1 and 8.8.8.8

Check 5: Firmware Update

Outdated firmware can cause connection stability issues. Check the router manufacturer's site for the latest firmware version and update if behind.

Router Buying Guide - specs and selection
Best WiFi Routers - replacement options